Base for read/write station U-P6-B6 - фото 1 - id-p95199139

Характеристики и описание

Описание оборудования
Base for PROFIBUS DP
Indicators/operating means
DIP switch	Setting the station address bus connection ON = active OFF = non-active
Electrical specifications
Rated operating voltage	20 ... 30 V DC , ripple10%_SS , PELV
Power consumption	max. 5 W with read/write head IPT*-FP
Galvanic isolation
Interface
Physical	RS-485
Protocol	PROFIBUS DP acc. to EN50170
Transfer rate	9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s 3; 6; 12 Mbit/s self-synchronizing
Ambient conditions
Ambient temperature	-25 ... 70 °C (-13 ... 158 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Degree of protection	IP67 according to EN 60529 with IPT*-FP
Connection	screw terminals
Interface cable	2 x 0.64 mm², double screened, acc. to PROFIBUS standard EN 50170
Supply	up to 3 x 1.5 mm²
Material