AS-Interface pneumatic module VAA-2EA-G1-ZE/P-V2A - фото 1 - id-p95198799

Характеристики и описание

Описание оборудования
Pneumatic module 2 inputs/2 pneumatic outputs
General specifications
Slave type	Standard slave
Indicators/operating means
LED AS-i	AS-Interface voltage; LED green
LED IN	switching state (input); 2 LED yellow
LED OUT	Switching state (output); 2 LED yellow
Electrical specifications
Rated operating voltage	29.5 ... 31.6 V from AS-Interface
Rated operating current	? 45 mA (without sensors)
Input
Number/Type	2 inputs for 2- or 3-wire sensors (PNP), DC
Supply	from AS-Interface
Current loading capacity	? 100 mA, short-circuit protected
Switching point	OFF: ? 1.5 mA ON: ? 5 mA, ? 10 V
Output
Number/Type	2 pneumatic outputs with separated 3/2-way valves
Pneumatic output
Venting guide	Connector
Compressed air	2 ... 8 bar, filtered (5 µm), oiled or unoiled compressed air
Air throughput	400 l/min
Directive conformity
Electromagnetic compatibility
Standard conformity
Degree of protection	EN60529:2000
AS-Interface	EN62026-2:2013
Programming instructions
Profile	S-3.F
IO code	3
ID code	F
ID1 code	F
ID2 code	F
Data bits (function via AS-Interface)	input output
Parameter bits (programmable via AS-i)	function
Ambient conditions
Ambient temperature	0 ... 55 °C (32 ... 131 °F)
Storage temperature	-20 ... 85 °C (-4 ... 185 °F)
Mechanical specifications
Degree of protection	IP67 according to EN 60529
Connection	cable piercing methos or terminals flat cable or standard round cable inputs: M12x1 quick disconnect outputs: plug-in hose connector (8 mm)
Mass	approx. 200 g
Mounting	DIN rail or screw mounting